Fixing Doors in ower home.

Hello, I was asked to do a little something on fixing a door. It could be sticking or not lac hing rite.

   So the first thing we'll do is to get some 3" drywall screws and ow er power drill.

   I all ways look at a door plum. Which means up and down or down then up. Either way your going to pull the door as close to the frame of the latch side. So you can still see light but from Top to Bottom you'll find the different. Your going to want the top to be the same as the bottom. sometimes just taking a hammer and hitting the hing in helps but that were going to take a screw out of the hing and run a 3' in its place. Most screws that are on a door area only in the 1 buy muterail. NOT in the jackstudd witch is best for the strength of the door. Remember do all ajust
ments before you put you 3' screw in place it will suck the door in so just easy with the trigger on the drill.

Now that we have that all in place and ow er door swings nick and then it wont latch rite. so then we just take a 5 in 1 and with the point they'll be a slot bend it back this will tighten the lock and latch .loosen the screws a bit and smack with the hammer to set ow er place. Then Titan.

For the best string ht use 3" it will suck in so take it slow.

so now that that's done we can move on to the next job.